How to Clean a Jack LaLanne Power Juicer: Quick and Easy Steps

Jack LaLanne is widely considered to be the fitness Godfather and the king of modern fitness. His work has inspired an entire generation of individuals around the world, especially when it comes to living healthier. With his work, he has helped many people to change how they view their fitness. The brand makes a variety of fitness equipment, and Jack LaLanne juicer is one of them. This post will consider how to clean a Jack LaLanne power juicer Trusted Source Juicer - Wikipedia A centrifugal juicer cuts up the fruit or vegetable with a flat cutting blade. It then spins the produce at a high speed to separate the juice from the pulp. .

If you own one of these and you’re looking for how to clean it, you might not find plenty of instructions on the Internet. However, we have sought to remedy that by taking all the information we could gather and compiling it into this guide on how to clean the power juicer. You should also check out this article on the best twin gear juicers for more options on the market.

What you will need

  • Damp sponge or cloth
  • Mild detergent
  • Soft bristle brush
  • Drip catcher
  • Plastic bag

Disassembling your Jack LaLanne juicer

The first step to cleaning the Jack LaLanne juicer is taking it apart. There isn’t only one model from the brand. But the good thing is that once you have mastered this, you have mastered everything. Anyway, before you take apart any model, it would be best for you to check out the instructions contained in the user manual.

To disassemble, one of the best tools you could use is the crescent tool. Thankfully, this tool is contained in the package. It is required for removing the blade from the filter’s bottom.

Before you start any disassembling, turn off the power to the appliance and unplug it. This will prevent electrocution.

After turning off the appliance, then you need to remove the pusher from the chute. It is important to do this before you lower the silver locking bar that unlocks the lid.

To unlock the blade, press the pair of pegs on the crescent tool into the holes that are on the blade and turn it anticlockwise.

This should detach the blade. Remove the blade gently, then remove the filter and receptacle from the filter’s base.

Disassembling without the tool

For some models, the crescent tool is not included in the juicer. This is because it is not required for such models.

For these models, the filter and blade cannot be detached except they are unscrewed – which is not recommended.

In such cases, after unplugging the machine, remove the pusher from the chute and remove the lid. Next, remove the pulp collecter. Then hold the receptacle and blade and twist it clockwise to detach from the juicer’s base.

Dishwasher-safe Jack LaLanne juicer parts

If you are thinking about using a dishwasher to clean the Jack LaLanne juicer, then the first thing is to check out the instructions from the manufacturer.

According to the manual, the removable parts of the machine, apart from the motor base, are dishwasher safe.

Parts you should clean manually.

You can clean all parts of the machine manually, and if you are unsure about the dishwasher’s ability to clean the parts, then you should clean it manually.

Some of the parts that you need to clean manually include the motor base, blades, pusher, and pulp container.

Cleaning your Jack LaLanne juicer

This section focuses on how to clean the Jack LaLanne juicer. We provide step-by-step instructions on correctly cleaning the machine.

Before you begin, keep in mind that it is pretty easy and straightforward to clean the appliance. Here are the steps that you should follow:

Step 1. First of all, the most important thing to do before you begin cleaning is to switch off the appliance. After switching it off from the power button, wait for the motor to stop running, then unplug the power cord from the electric output.

Ensure that your hands are completely dry in this process so that you don’t end up electrocuting yourself.

Step 2. The next step is to disassemble the appliance. We have covered how to do this earlier in this article. As you remove each part, place it on paper towels or some other surface.

When disassembling, the goal is to remove the pusher from the chute, removing the blade and the pulp guard.

Remove the blade gently to prevent cutting yourself.

Step 3. Wipe the base of the juicer with a cloth or sponge. Take note never to submerge the motor in water as that will damage the appliance. Also, use a soft cloth to wipe the body of the juicer because abrasive cloths might damage the finish. TerraEquip makes some of the best sponges and cleaning materials for appliances on the market.

Step 4. Toss the detached parts into the dishwasher (as long as they are dishwasher compatible). You could also wash the parts manually with a mild detergent and warm water. Reviews praise Dawn Dish Soap as one of the best of its type on the market.

Wash and rinse the parts with clean water. Then, pat dry with a soft towel or simply air-dry the parts.

Step 5. The blade and filter require special care, so rinse them under clean water and use a soft brush to scrub them. Rinse once more before you air dry or dry with a clean cloth.

Step 6. After washing all the parts and drying them, reassemble the juicer and test it out to ensure that it is working.

Reassembling your Jack LaLanne juicer

This is a very easy process.

Keep in mind that the receptacle is fitted on the base before you replace the filter.

To reattach the blade, use the crescent tool and turn it clockwise to lock it in. Next, replace the pulp collector as well as the lid on the base.

After putting these back, raise the locking bar and return the pusher to the top of the lid.

Cleaning tips

  1. Contain the mess

Since this can become messy, using a liner on the container will help you remove whatever pulp lies in the container with minimum fuss.

  1. Clean after use

To keep your machine in the best condition, always clean it after using it.

  1. Get the right brush.

You cannot use the same type of brush for all parts of the machine. Use the right strength of brush for different parts like the filter and blades.

What you shouldn’t do while cleaning

  • Never use hot water to wash the machine because of the risk of deformation. Hot water can also destroy the magnetic sensors in the juicer and prevent the machine from working correctly.
  • Don’t use a knife to remove fruits or other things from the filter.
  • Use the right brush to prevent abrasion or damage.

Final thoughts

A Jack LaLanne juicer is an important component of your fitness journey. It is a powerful appliance that will help you turn your fruits and produce into juice in a matter of minutes. While it is a powerhouse, you should keep in mind that it requires frequent cleaning based on how often you use it. Check out this article on the juicers that are as easy to clean as this machine.

In this article, we have broken down the process involved in cleaning the machine. We hope that this guide on how to clean Jack LaLanne power juicer helps you in maintaining your appliance.


Juicer - Wikipedia
A centrifugal juicer cuts up the fruit or vegetable with a flat cutting blade. It then spins the produce at a high speed to separate the juice from the pulp.

The post How to Clean a Jack LaLanne Power Juicer: Quick and Easy Steps appeared first on